Wind Speed (WS350)
WS350i wind speed sensor with suitable mechanic and aluminum body. The most output is exist. It has a sensor for activating the body heater on cold season.
| Specification | |
| Protection IP | IP65 |
| Operation temperature | -20 to +70 |
| Operating range | 0 to 75 m/s |
| accuracy | 0.2 m/s |
| Output | Digital(Frequency) |
Power supply | 36mA at 12VDC For heater 150mA at 12VDC |
Base diameter | 35mm |
Wind Deirection (WD740)
WD740i wind direction sensor with suitable mechanic and aluminum body. The most output is exist. It has a sensor for activating the body heater on cold season.
| Specification | |
| Protection IP | IP65 |
| Operation temperature | -20 to +70 |
| Operating range | 0 to 360 D |
| Output | Digital (Frequency) |
Power supply | 35mA at 12VDC For heater 150mA at 12VDC |
Base diameter | 35mm |
Temperature/Humidity (TH202)
HT202 is a combination sensor of air temperature and air humidity with special shield. This sensor is different from similar type because of RS485 serial output.
| Specification | |
| Accuracy | 0.1 C / 0.1 % |
| Operation temperature | -30 to +85 C |
| Operating Humidity | 0 to 100 % |
| Cover type | Plastic shield with steel base and resistance on sunny and cold weather |
| Output | Digital(Frequency) |
Power supply | 7mA at 12VDC |
PDF File
Rain Guage Sensor (PTN200)
The PTN200 rain gauge is strongly constructed from aluminum and anodized. The tipping mechanism is stainless steel and the design is rugged and reliable. This rain gauge has 2 silicon rubber resistance heaters. One of them is for funnel area and the other is for bucket area.
| Specification | |
| Mechanism | Tipping Bucket (2V) |
| Operation temperature | -35 to +70 C |
| Area of orifice | (6.1/4 inch) 200 cm2 |
| Resolution | 0.1 mm |
| Calibration resolution | 5 % |
| Electrical mechanism | Passive |
| Output | pulse |
| Number of heater | 2 |
| Heater range operation | On: less than 2 C Off: more than 10 C |
| Heater consumption | 25w:2A at 12VDC |
PDF File
Soil Moisture
The output of this sensor is 0-1V and suitable with soil humidity. It has logical operation toward other similarity kind.
| Specification | |
| Accuracy | 2 % |
| Operation temperature | -30 to +70 C |
| Resolution | 0.2 % |
| Supply voltage | 3V to 20VDC |
| Output | 0~1 V |
Soil Temperature
The type of this sensor is PT100 and with four wires connected to analog channel of dataloggers.
| Specification | |
| Accuracy | 0.2 C |
| Operation temperature | -20 to +60 C |
| Resolution | 0.1 C |
| Calibration Accuracy | 0.2 C |
| Output | Resistor PT100 |
